INNOVATIVE PEDAGOGICAL APPROACHES TO TEACHING LIFE SAFETY AND CIVIL PROTECTION IN VOCATIONAL EDUCATION INSTITUTIONS
DOI:
https://doi.org/10.37332/Keywords:
life safety, civil protection, vocational education, safety culture, digitalization of education, innovative learning technologies, vocational education institutionsAbstract
Koliasa P.I., Bashutska O.S., Zavytii O.P. Innovative Pedagogical Approaches to Teaching Life Safety and Civil Protection in Vocational Education Institutions
Purpose. The aim of this article is to provide a theoretical substantiation of innovative approaches to teaching life safety and civil protection in vocational education institutions and to determine their role for the formation of professional competence of future specialists.
Methodology of research. The methodological basis of the study is a set of general scientific and special methods of cognition. Methods of analysis and synthesis were used to study scientific approaches to teaching life safety and civil protection and to determine their key characteristics. A systematic method was used to consider the preparation of vocational education seekers for safe activities as an integrated pedagogical system that combines cognitive, value-motivational, and behavioral components. Comparative analysis was used to compare traditional and innovative approaches to teaching safety-related disciplines. Generalization and abstraction made it possible to formulate theoretical conclusions regarding the feasibility of implementing constructivist, competency-based, risk-oriented, and axiological approaches. Theoretical modeling was used to substantiate the directions of modernization of teaching methods, taking into account the digitalization of the educational environment and the use of simulation and immersive technologies.
Findings. The feasibility of modernizing the teaching of life safety and civil protection through the introduction of innovative pedagogical approaches, in particular the use of digital, simulation, and immersive technologies, gamification, microlearning, and the integration of safety cycle disciplines with professionally oriented subjects, has been substantiated. It has been proven that a comprehensive combination of cognitive, value-motivational, and behavioral components of training contributes to the formation of students' readiness for activities in conditions of risk and uncertainty. It has been proven that the introduction of innovative pedagogical technologies contributes to increasing the effectiveness of professional training of students, forming their psychological readiness for activities in crisis situations, and developing information and digital competence.
Originality. The systematization and theoretical generalization of innovative approaches to teaching security-related disciplines in vocational education institutions based on the integration of constructivist, risk-oriented, competence-based, and axiological approaches has been further developed.
Practical value. The conclusions and generalizations obtained can be used in the development of educational programs, teaching and methodological support, and digital educational resources on life safety and civil protection, as well as in the process of improving the skills of teaching staff of vocational education institutions.
Key words: life safety, civil protection, vocational education, safety culture, digitalization of education, innovative learning technologies, vocational education institutions.
References
1. The Verkhovna Rada of Ukraine (2017), The Law of Ukraine “On Education” dated 05.09.2017 no. 2145-VIII, available at: https://zakon.rada.gov.ua/laws/show/2145-19 (access date June 12, 2025).
2. The Verkhovna Rada of Ukraine (1998), The Law of Ukraine “On Professional (Vocational and Technical) Education” dated 10.02.1998 no. 103/98-VR, available at: https://zakon.rada.gov.ua/laws/show/103/98-vr (access date June 12, 2025).
3. The Verkhovna Rada of Ukraine (2012), Code of Civil Protection of Ukraine dated 02.10.2012 no. 5403-VI, available at: https://zakon.rada.gov.ua/laws/show/5403-17 (access date June 12, 2025).
4. Bykov, V.Yu. (2019), “Digital transformation of education and science: current state and development prospects”, Informatsiini tekhnolohii i zasoby navchannia, Vol. 70, no. 2, pp. 15-30, DOI: https://doi.org/10.33407/itlt.v70i2.2693.
5. Pryhodii, M.A., Hurzhii, A.M., Humennyi, O.D. et al. (2023), Tsyfrovi tekhnolohii profesiinoi pidhotovky maibutnikh kvalifikovanykh robitnykiv u voiennyi ta povoiennyi chas [Digital technologies of professional training of future skilled workers in wartime and postwar period], tutorial, Instytut profesiinoi osvity NAPN Ukrainy, Kyiv, Ukraine, 327 p.
6. Makransky, G. and Petersen, G. (2019), “Immersive virtual reality and learning: A meta-analysis”, Educational Psychology Review, Vol. 31, pp. 1-29, DOI: https://doi.org/10.1007/s10648-019-09470-5.
7. Radianti, J., Majchrzak, T.A., Fromm, J. and Wohlgenannt, I. (2020), “A systematic review of immersive virtual reality applications for higher education”, Computers & Education, Vol. 147, DOI: https://doi.org/10.1016/j.compedu.2019.103778.
8. Cronin, J. and Durham, M.L. (2024), “Microlearning: A concept analysis”, Computers, Informatics, Nursing, no. 42(6), pp. 413–420, DOI: 10.1097/CIN.0000000000001122.
9. Cabinet of Ministers of Ukraine (2018), “Concept of development of the digital economy and society of Ukraine for 2018–2020” dated 17.01.2018,no. 67-r, available at: https://zakon.rada.gov.ua/laws/show/67-2018-p (access date June 12, 2025).
Downloads
Published
Issue
Section
License
Open-access articles (open-access journals)
Authors whose articles are published in open-access retain all rights to the content of the articles.
Open access articles are committed to be published under Creative Commons Attribution (CC BY) 4.0. This license allows others to distribute, edit, correct and build upon your work, even commercially, as long as they indicate your authorship. Detailed information at Creative Commons site: https://creativecommons.org/licenses/by/4.0/
Permissions for open-access journals
If the article is published in open-access under CC BY 4.0 or CC BY-NC 4.0 (which was possible till the 15th of December, 2018) licenses, users may reproduce it in accordance with their terms.
Additionally, if the article had been published under CC BY-NC 4.0 (this license authorizes others to download your works and share them with others as long as they indicate your authorship, but they can’t use them commercially in any case.), the use for the following commercial purposes requires permission:
– reproduction of content in a work or product intended for sale;
– reproduction in presentations, brochures or other marketing materials used for commercial purposes;
– distribution of the content to promote or market a person, product, course, service or organization;
– text and data mining for the purpose of creating a saleable product or product which benefits from promotional or advertising revenue;
– use of the content by a commercial entity or individual for the purposes of remuneration, directly or indirectly through sale, licensing, promotion or advertising;
– linking to the content (in an email, webpage, portable electronic device or otherwise) for the specific purpose of marketing or advertising a person, product, course, service or organization for commercial benefit.
For further details and permission requests, please contact.
